The more of the list below you can supply, the more useful our first reply is — but a 3D drawing alone is enough to start.
| Item | What helps us quote accurately |
|---|---|
| 3D drawing | STEP / IGES / UG / STP preferred. Any format we can open is fine. |
| Material or grade | If you already know it (e.g. Victrex 450G), say so. If not, describe the duty and we will recommend. |
| Part size and wall thickness | Overall dimensions and the thinnest wall are the two figures that drive tooling cost most. |
| Annual volume and first order | Determines whether rapid tooling or production steel is the right answer. |
| Critical dimensions and tolerances | Which features must hold, and to what tolerance. |
| Application conditions | Service temperature, chemical exposure, sterilization, regulatory requirements. |
| Target date | So we can tell you honestly whether the timeline is achievable. |
Send the drawing as an attachment with your quantity and target date. Best for full project briefs and documentation.
WhatsApp / Tel: +86 135 7080 2169
WeChat: AOTUMUJU_2008
Fastest for a quick feasibility opinion or to send a drawing straight from your phone.
We read the drawing, check feasibility and flag anything that will affect cost or tool life.
Draft, wall thickness, gating and ejection review — with risk points called out.
Fill, pack and warpage assessment, plus the shrinkage compensation plan.
Price with a breakdown of what drives it, cycle estimate and lead time. Within 48 hours.
Send STEP / UG / STP files by email or WeChat — you get material analysis, gating proposal, cycle estimate and mold price in one reply.
Request a Quote